Gallery - David Carter Metalwork

You may some photos of the clocks in full below. Click onto the photos for a closer view.

Hand painted steel case with stainless steel details and acrylic clock face front.
24cm high with 15cm wide and 8cm deep base
This is signed and numbered on the bottom.
German quartz movement

SMC

Hand painted steel case with stainless steel details and acrylic clock face front.
Bronze coloured case and silver window
28cm high with 17cm wide and 10cm deep base
This is signed and numbered on the bottom.
German quartz movement

SMC GREEN

Hand painted steel case with stainless steel details and acrylic clock face front.
Copper coloured case and green inner window
28cm high with 17cm wide and 10cm deep base
This is signed and numbered on the bottom.
German quartz movement

GMC

Hand painted steel case with stainless steel details and acrylic clock face front.
34cm high with 15cm wide and 8cm deep base
This is signed and numbered on the bottom.
German quartz movement

WCB

Hand painted steel case with stainless steel details and acrylic clock face front.
76cm high and 23cm wide
This is signed and numbered on the bottom.
German quartz movement

WCA

Hand painted steel case with stainless steel details and acrylic clock face front.
48.5cm high and 12cm wide
This is signed and numbered on the bottom.
German quartz movement

19 DRC

Hand painted steel case with stainless steel details and glass clock face front.
50cm high with 27cm wide and 1cm deep base
This is signed and numbered on the back.
Chiming quartz movement.

15 DRC

Large mantle clock with chiming quartz movement. Approx 50cm wide.

Wall clock handmade metal individually signed and numbered

Hand painted steel
Signed and numbered.
German quartz movement

You may view some photos of the candleabras below. If you click onto the photos you will be presented with a close up.

CSTB

Forged bronze stem with steel fabricated base and patinated brass fare. Wax finish on base with lacquered stem and flare.
Signed and numbered on base.
Versions of this design I have been making since the late 1980s
26cm high with 8cm base.

CLF

Forged and fabricated from steel. Wax finish. Signed and numbered on base.
Versions of this design I have been making since the late 1980s.
50cm wide and 42cm highest point. Base is about 13cm deep
Flat so suitable for mantle piece etc

CLFC

Forged and fabricated from steel. Wax finish. Signed and numbered on base.
Versions of this design I have been making since the early 1990s.
40cm wide and 40cm highest point. Base is about 12 cm deep
Flat so suitable for mantle piece etc

Forged and fabricated from steel. Wax finish. Signed and numbered on base.
Versions of this design I have been making since the early 1980s
12cm high with a 8cm wide base.

CSPS

STEEL WITH BRONZE STEMS, CAST GLASS AND MARBLE BASE. EARLY 1990S. 19.5 CM HIGH

CLFJ

Forged and fabricated from steel. Wax finish. Signed and numbered on base.
Versions of this design I have been making since the late 1990s.
58cm wide and 35cm highest point. Base is about 13cm deep
Flat so suitable for mantle piece etc

03 DRC

Round five pronged shown with bronze arms and brass flares with steel base. Also available in all steel.

CLFD

Forged and fabricated from steel. Wax finish. Signed and numbered on base.
Versions of this design I have been making since the late 1990s.
70cm wide and 54cm highest point.
Flat so suitable for mantle piece etc

CLTC

Forged and fabricated from steel. Wax finish. Signed and numbered on base.
Versions of this design I have been making since the late 1990s.
20cm wide across flares and 33cm highest point.

CLTB

Forged and fabricated from steel. Wax finish. Signed and numbered on base.
Versions of this design I have been making since the late 1990s.
31cm wide and 30cm highest point. Base is about 8cm deep
Flat so suitable for mantle piece etc

CLTD

Forged and fabricated from steel. Wax finish. Signed and numbered on base.
Versions of this design I have been making since the late 1990s.
21cm wide and 32cm highest point. Base is about 9cm deep
Flat so suitable for mantle piece etc

CSTH

Forged and fabricated from steel. Wax finish. Signed and numbered on base.
Versions of this design I have been making since the 1980s
28cm high with a 9cm wide base.

Candelabra1

Fabricated from steel. Bronze stems with cast lead crystal on a marble base. Wax finish. Signed and numbered on base.
One of only two ever made. Dated from around 1996 after I set up to do glass casting which I stopped a few years later.
Base is 17cm square. Its 19.5cm high and 20cm across widest point. Inside diameter is 10.5cm